Controlled-products-systems-group WDG-5912 Manuel d'utilisateur Page 27

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 37
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 26
©2010 Cypress Computer Systems, Inc. 2/1/10 WDG-5912 Programming Instructions Version 1.0.2 Page 21
WDG-5912 Programming - Reset to Factory
Defaults
Reset Jumper
It may be necessary to reset the WDG-5912 to factory default parameters. If the wedge is
to be reset the cover will have to be removed.
Remove USB cable from wedge.
A jumper will need to be installed on J5.
Install USB cable to apply power to wedge.
Wait at least 30 seconds.
Remove USB cable and then remove Reset Jumper from pins of J5. Jumper can be stored
on one pin of the header.
Vue de la page 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 36 37

Commentaires sur ces manuels

Pas de commentaire