Controlled-products-systems-group 26SASM Manuel d'utilisateur télécharger pdf (Page 10)

Example: Validate card number 100.

Place the “1” card on the TOUCH CARD

reader plate, remove it and place

the “0” card on the TOUCH CARD

reader plate, remove it and place again

the “0” card on the TOUCH CARD

reader plate, remove it and place the

“VALID” card on the TOUCH CARD

reader plate, and remove it.

1 + 0 + 0 + VALID

VALIDATING A BLOCK OF CARDS.

To validate a block (continuous

sequence) of cards, place the sequence of cards representing the first

card number of the block on the TOUCH CARD

reader plate, then the

“*” (THRU) card, then the sequence of cards representing the last card

number of the block, and then place the “VALID” card on the TOUCH

CARD

reader plate.

Example: Validate cards 5 thru 225.

NOTE: After a block Validate or Void is complete, the LED will turn

Green. Then the reader will beep and the LED will turn off.

Place the “5” card on the TOUCH CARD

reader plate, remove it and place

the “

” (THRU) card on the TOUCH CARD

reader plate, remove it and

place the “2” card on the TOUCH CARD

reader plate, remove it and again

place the “2” card on the TOUCH CARD

reader plate, remove it and place

the “5” card on the TOUCH CARD

reader plate, remove it and place the

“VALID” card on the TOUCH CARD

reader plate, and remove it.

5 +

+ 2 + 2 + 5 + VALID

Secura Key • 6

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Pas de commentaire

Controlled-products-systems-group 26SASM Manuel d'utilisateur Page 10