Controlled-products-systems-group 26SASM Manuel d'utilisateur télécharger pdf (Page 15)

INSTALLATION

WIRING INSTRUCTIONS

The ENTRACOMP

26SA is provided with a connector and 7 wire

leads (See Figure 1). Using appropriate wire nuts or crimp on

connectors, wire the unit as per the table below. Be sure unused

wires are insulated to avoid shorting. In addition to the wiring below,

AN EARTH GROUND IS REQUIRED. It must be connected to the

green screw on the mounting bracket .

WIRE COLOR DESCRIPTION

1 WHITE

10-24 VAC OR

10-24 VDC

2 WHITE

3 YELLOW

NORMALLY OPEN

4 N/A NOT USED

5 GREEN COMMON

6 N/A NOT USED

7 RED 8 VDC FOR SECURELAY™

8 N/A NOT USED

9 ORANGE REMOTE OPEN

10 BROWN REMOTE OPEN

* Can be reprogrammed as Normally Closed, See page 10.

TABLE 1

Secura Key • 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Pas de commentaire

Controlled-products-systems-group 26SASM Manuel d'utilisateur Page 15