Controlled-products-systems-group 26SASM Manuel d'utilisateur télécharger pdf (Page 21)

Secura Key • 17

4. Connect power and control lines to wire leads provided as

per the wiring instructions.

5. Plug connector into reader board.

6. Place ENTRACOMP

26SA housing against mounting plate,

top edge first, centering housing on retaining tabs. Secure

housing to plate at bottom using one 6-32 x 3/8 security

screw provided or equivalent.

7. Lock cam lock.

SURFACE HOUSING WITH FLANGE MOUNT ADAPTER

(See Figure 7)

1. Position flange mount adapter (optional) against post flange

(not supplied). Locate and mark four (untapped) holes. Then

drill and tap four 10-32 holes in post flange.

2. Apply silicone bead around perimeter of post flange. Place

flange mount adapter against post flange and secure with

four 10-32 x 1/2 flat head countersunk screws provided.

3. Follow instructions 2 - 7 for post mount adapter.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Pas de commentaire

Controlled-products-systems-group 26SASM Manuel d'utilisateur Page 21